2
G Operating instruction
Thank you for choosing aHama product.
Take your time and read the following instructions
and information completely.Please keep these
instructions in asafe place for futurereference. If
you sell the device, please pass these operating
instructions on to the new owner.
This product has been developed specically to
provide your mobile device with energy while you
areonthe go without requiring apower supply or a
power supply unit.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
•1universal multi-bracket
•1adhesive pad
•1ventilation grill clamp
•These operating instructions
3. Safety Notes
•Use the product for its intended purpose only.
•Protect the product from dirt, moistureand
overheating, and only use it in adry environment.
•When using this product, observe the applicable
local traclaws and regulations.
•Donot drop the product and do not expose it to
any major shocks.
•Dispose of packaging material immediately
according to locally applicable regulations.
•Donot modify the product in any way.Doing so
voids the warranty.
4. Installation
Note
•Beforemounting the holder,check the
installation options in your vehicle. If in doubt,
consult the manual for your vehicle or contact
the manufacturer.
•Never apply force when using the product or
during installation.
Warning
•Take carethat components such as airbags,
safety areas, controls, instruments, etc. and
visibility arenot blocked or restricted.
4.1. Universal holder
•Attach the universal holder using the catch on the
holder (ventilation grill clamp, adhesive pad).
•Press the button on the side of the universal holder
to open the holding brackets. (B 1)
•Insert the terminal device of your choice and
secureitinplace by lightly pushing the holding
brackets together.(B2)
•Inorder to easily remove the terminal device, press
the button on the side of the universal holder.(B1)
Note
•Always take your terminal device out of the
holder beforeattaching or removing the holder
(Adhesive pad, ventilation grillclamp).
To Next Page
Loading...