To Next PageTo Next PageWhat to do if Hamilton Beach Commercial MIXSTATION HMD1000 Mixer MixStation™ will not turn on?
If the Hamilton Beach Commercial Mixer's MixStation™ won't turn on, ensure it's properly plugged in and then check for a blown fuse or tripped breaker.
Why is the red light flashing on my Hamilton Beach Commercial MIXSTATION HMD1000 Mixer?
If the Hamilton Beach Commercial Mixer's MixStation™ displays a flashing red light (flashing one, two, or three times, then pausing and repeating), consider these potential causes: * The MixStation™ may have overheated. Stop the MixStation™, remove the mixing container, unplug it, and allow it to cool for about 15 minutes. * The Spindle Shaft might have stopped rotating. Unplug the unit, rotate the Spindle Shaft to unlock it, and use a rubber spatula to remove any blocked food. * The motor speed may be too fast. Unplug the unit for 30 seconds, then plug it back in. If the error continues, further assistance is needed.
General| Brand | Hamilton Beach Commercial |
|---|---|
| Model | MIXSTATION HMD1000 |
| Category | Mixer |
| Language | English |
