4
How to Use the Drying Station
1 4
5
Assemble shelves on a flat sur-
face. Roll out shelf so zipper is
closest to you. Open zipper.
Insert side rod into corner
anchors.
Side rods are rolled in with
webbing.
2
Repeat with remaining side rod
on right hand side.
3
Insert side rod into left-hand
pre-sewn sleeve.
Assemble unit on a flat surface.
Go to dryingstation.com to see a video of how to
assemble.
6
Close zipper to tighten shelf
mesh.
8
Assemble one shelf at a time
beginning with lowest shelf with
feet.
Attach the feet to first assem-
bled shelf. Press firmly to lock in
place.
7
To Next Page
Loading...