4
How to Attach Slicer/Shredder Accessory
w WARNING
Moving Parts
Hazard.
To reduce the risk of
personal injury, always unplug
mixer before inserting or removing
accessories.
1. Before inserting Accessory,
make sure Stand Mixer is
unplugged and Stand Mixer
Speed Control Dial is set to
OFF ( ).
2. Lift up Accessory Cover and
let rest on Mixer Head.
3. Turn Accessory Knob
counterclockwise until
Accessory Knob screw
cannot be seen in Accessory
Opening.
840336500 v16.indd 4 4/14/20 12:10 PM
To Next Page
Loading...
