4
How to Use
1
3
4
2
5
Push attachment onto attachment
shaft.
Press head lift button.
Always make sure mixer is
unplugged and speed control
is set to OFF (O).
6
Press head lift button. Tilt mixer head up.
BEFORE FIRST USE: Wash bowl
and attachments in warm, sudsy
water; rinse and dry. Always
unplug mixer from electrical outlet
before inserting or removing
attachments.
Tilt the mixer head down.
CAUTION: Do not place fingers in
hinge area.
7
Cut and Crush Hazard.
Unplug mixer before inserting or removing attachments.
Failure to do so can result in broken bones or cuts.
w WARNING
To Next Page
Loading...
