7
How to Use Slicing/Shredding Disc
1
Align bowl and base. Turn bowl
clockwise to lock into place.
NOTE: Unit will not work unless
bowl is locked.
2
Carefully place disc onto motor
shaft with desired side (Slice or
Shred is stamped on each side
of the blade) facing UP.
3
Align lid and bowl.
4
Turn lid clockwise to lock into
place. NOTE: Unit will not work
unless lid is locked.
6
5
Cut food to fit food chute. Fill chute
with food.
7
Select On or Pulse on control switch.
On: Processor will run continuously.
Pulse: For instant on and off control.
8
Always use food pusher to feed
food into the chute. NEVER PUSH
FOOD THROUGH CHUTE WITH
HANDS.
Make sure control switch is turned to Off and unit is unplugged. NOTE: Operate using only one blade or disc at a time.
w WARNING
Laceration Hazard. Handle blade
carefully; it is very sharp.
To Next Page
Loading...
