4
How to Brew a Single-Serve Pack
w CAUTION
Burn Hazard.
To avoid contact with hot coffee
or water:
• Do not fill water above MAX fill
line (10 ounces [296 ml]).
• Fill reservoir with cup or travel
mug of water into which the
coffee will be brewed.
• Fully insert cup or travel mug
under brew basket.
• For best results, use K-Cup
®
*
packs.
w CAUTION
Cut Hazard.
Removable single-serve pack
holder has a sharp blade. Use
caution when handling.
NOTE: It can take up to 2 minutes
before brewed coffee starts
dispensing into your cup or travel
mug. Total brew time average is
4 minutes. For best results, allow
the coffee maker to cool for at
least 2 minutes between brewing
cycles.
1 2 3
Press down on edge of the pack
until the pack snaps into place
and hole is punched in the
bottom. Do not remove foil.
Place a pack into the single-serve
pack holder.
4 5
Press down on brew basket
handle to lock and puncture
the foil lid on the pack.
*K-Cup is a registered trademark of Keurig, Inc. Use of the K-Cup trademark does not imply any affiliation with
or endorsement by Keurig, Inc.
“SNAP”
To Next Page
Loading...
