10
How to Set the Time for the First Time
32 4
Press and release button.
1
“12” will flash.
Press
button to adjust by
1-hour increments.
To adjust hours faster, press and
hold
button. Release button
and wait 3 seconds for the
minutes to begin flashing,
indicating minutes can now
be set.
NOTE: If you press the
button before setting the clock,
the clock display will disappear
for your convenience. At any
time, the clock can be set by
pressing the button.
5
Minutes will flash for only 3 seconds
and then stop flashing if the clock
button is not pressed or held within
that time. Press button to adjust
by 1-minute increments.
6
To adjust minutes faster, press
and hold button. Release
button and wait 3 seconds for
the clock to stop flashing and the
time will be set.
840274900 ENv02.indd 10 11/4/2016 9:53:17 AM
To Next Page
Loading...
