EasyManua.ls Logo

Hamilton Beach FlexBrew - How to Purge; How to Clean the Piercing Needle

Hamilton Beach FlexBrew
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
How to Clean the Piercing Needle
2
1
If Needle is Clogged: The needle is located above the coffee drawer inside the unit. Remove coffee drawer. Bend a small paper clip as shown;
insert the tip of the paper clip through the hole/eye of the needle to ensure grounds have been removed. Replace coffee drawer and place a
large travel mug on cup rest. Brew 2 or 3 times with cold water. Be careful, the needle is sharp. Do not touch the needle when cleaning it.
How to Purge
2
1
Place mug on cup rest. Press
(ON/OFF) button for 3 seconds.
When the coffee maker is purging,
the button will illuminate and
will turn off when the cycle is
complete.
3
NOTE: If you want to stop the
brew cycle at any time and
switch to a smaller cup size,
purge water from the unit.
Purge function allows you to
empty the reservoir into a cup
and replace it with fresh water.
This is recommended when it
has been more than a week
without any use.
4
840274900 ENv02.indd 12 11/4/2016 9:53:18 AM

Other manuals for Hamilton Beach FlexBrew

Related product manuals