8
1 3
Add water to the reservoir.
Put the coffee drawer back into the
coffee maker and push it in until it
is flush with the front surface.
4
How to Brew a Single-Serve Pack
Plug in unit. Remove the coffee drawer. Add single-serve pack to
single-serve pack holder (compatible with K-Cup pack such as UCC or
Starbucks*). Press down until flush with top surface.
7
Press (ON/OFF) to brew your coffee. Button will illuminate and
light will turn off when brew cycle is complete. After coffee is
brewed, remove the coffee drawer and press the easy-release button
to remove the single-serve pack. Rinse coffee drawer. Then put
drawer back into coffee maker.
2
6 85
Press to select cup size and press or to select regular
or bold strength. NOTE: Bold setting should be used for single-
serve packs and ground coffee for a more robust flavor.
CAUTION
Cut Hazard.
Removable single-serve pack
holder has a sharp blade. Use
caution when handling.
* K-CUP is a registered trademark of Keurig Green Mountain, Inc. Use of the K-CUP
trademark does not imply any affiliation with or endorsement by Keurig Green Mountain, Inc.
840274900 ENv02.indd 8 11/4/2016 9:53:16 AM
To Next Page
Loading...
