9
How to Use Plastic Dough Blade
1. Place Bowl on Base. Slide Dough
Blade straight down onto Motor
Shaft and add dry ingredients.
2. Place Lid on Bowl and push Lid
Latches down until they snap in place.
NOTE: Unit will not work unless
Latches on Bowl are locked and Food
Pusher is in place.
3. Plug into outlet. Press Puree/Knead
button.
4. Add liquid slowly through two small
holes at bottom of Small Food
Pusher, and follow recipe.
5. When finished, press OFF ( ) and unplug.
6. Lift up Lid Latches to remove Lid.
Lift straight up on Dough Blade and
remove food.
NOTE: Operate using only
one blade or disc at a time.
To Next Page
Loading...
Need help?
General
