3
22
32
K
Step#5 Remove ALL silicone from tube frame. See Arrow. Step#6 Mount NEW spacer nuts to bottom plate using
Note: This must be cleaned so that top Door Bearing existing screws.
rest flat under top plate.
K
17
K
K
10
2
3
3
2
Step#7 Replace Upper Door Ring with part in kit. Step#8 Replace upper and lower Door Bearings with
New ring has cylinder retained by screw for detent. parts in kit. Note: Make sure only one Bearing
Race is used on top and bottom of door.
To Next Page
Loading...