1"
2"
Activation of the glass
Activation of the adjustment
of the magnetic deviation
Activation of the compass
function
Setting the magnetic deviation
to the east (+) or west (-)
Validation of the setting (eg. 2° East)
(2)
(1)
(1) The minute hand points to the North. A more accurate
reading is obtained by holding the watch horizontally.
The digital display gives the set magnetic deviation.
After 30 seconds, the digital display returns to "h-m-s"
mode.
(2) For more information, see the explanation of the
magnetic deviation on page 18.
+ or - 1 degree
1"
1"
2"
(1) When the programmed time is reached,
the alarm can be stopped by pressing one of the pushers.
Activation of the glass
Activation of the alarm function
(eg. 12h19')
Setting the time
Incrementation or decrementation
by one minute
Validation of the setting
Deactivation of the alarm
Activation of the alarm
(1)
+ or - 1 minute
To Next Page
Loading...
