Need help?Do you have a question about the Hamlet HBCS1D10W and is the answer not in the manual?
Set default scan mode, single or continuous scan, and key delay options.
Set the scanner's communication baud rate from 600bps to 115200bps.
Configure serial port handshake (no check, XON/OFF, RTS/CTS, ACK/NAK) and timeout.
Enable/disable Code39, configure ASCII, MOD43 check, transmit checks, and multiple verification.
Configure UPC-A, UPCE, EAN13, EAN8 settings including changes to other formats and digit verification.
Configure compulsory pairing, pair new devices, and select wireless modes.
General| Interfaces Supported | USB |
|---|---|
| Scanning Technology | Laser |
| Scanning Speed | 100 scans/sec |
| Resolution | 0.1mm |
| Supported Barcodes | Code 39, Code 128, EAN-13, EAN-8, UPC-A, UPC-E, Interleaved 2 of 5, Codabar |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 85% RH (non-condensing) |
To Next Page
