2. Installation and use
Driver installation (Windows)
1. Insert the CD ROM into the CD drive of your computer.
2. Open the CD content and double-click the executable file to
start the installation program.
3. Follow the directions of the installation wizard. When the
installation is completed, press Finish.
Connection and use of the Smart Card reader
1. Plug the USB cable into a USB port on your computer.
2. The Red led of the reader turns on.
3. Insert the Smart Card into the HUSCR2 reader.
4. The Green led lights up indicating that the card is inserted
correctly.
Notes relating to the software
The use of a smart card as the Regional Services Card (CRS) or
the National Services Card (CNS) requires a dedicated software
distributed by the authority providing the service.
To download the software and for detailed information on its use,
please refer to the website of the relevant authority.
To Previous Page
Loading...
Need help?
General
