Hamlet SOLAR BLUETOOTH GPS RECEIVER User Manual

3
Collegare il dispositivo al PC/PDA:
A. Premere il pulsante”Power” sul dispositivo BT per 2
secondi.
B. Posizionare il ricevitore GPS in un punto adeguato (cielo
aperto) affinché possa ricevere il segnale GPS.
C. Accendere PC/PDA.
D. Ricercare l’apparecchio BT dal PC/PDA. Il dispositivo
GPS non richiede alcuna “passkey” per la connessione,ma
alcuni system BT la richiedono; digitare quindi [0000].
E. Collegare l’apparecchio GPS e assicurarsi che nel
programma “baud rate set” ci sia 9600 bps (standard).
F. La prima volta che si userà il Ricevitore GPS BT, si
raccomanda di provarlo all’aperto.
Connect to your PC/PDA:
A.
Push the power button for 2 seconds, power on the
Bluetooth GPS receiver .
B.
Put the Bluetooth GPS receiver at proper place (open to
sky) to receive the GPS signal.
C.
Turn on the power of your PC/PDA.
D.
Search for Blue tooth device by your Blue tooth manager
on your PC/PDA. The GPS device required no passkey for
connection. But some Blue tooth system is forced to enter
passkey, please use [0000] in such case.
E.
Connect to Solar Bluetooth GPS Receiver and then make
sure baud rate set at 9600 bps(standard) in your application
program.
F.
In firstly Use of this Solar Bluetooth GPS Receiver ,we
strongly recommend you to bring Solar Bluetooth GPS
Receiver User Manual -3- Bluetooth GPS receiver outdoor or
open sky.

Hamlet SOLAR BLUETOOTH GPS RECEIVER Specifications

General

Brand	Hamlet
Model	SOLAR BLUETOOTH GPS RECEIVER
Category	GPS
Language	English