HK-61902
The ERU Emulator is a device designed to be used at installation and test of CM HAMMAR´s ERRS Electronic Remote Release Systems.
With the Emulator it can be verifi ed that an electric pulse suffi cient to activate the HAMMAR H20 ERU Electric Release Unit is received at the
connection point for the ERU Emulator.
The emulator measure and checks the current and the duration for the electric pulse and compare this with settings stored in the device.
Push button
Red LED
Green LED
USER MANUAL
Power supply: CR2032 (coin cell battery)
Operating time: Approximately 200 hours
Water ingree protection: NO
Dimensions (L x H x D): 56 x 31 x24 mm
TECHNICAL SPECIFICATION
To Next Page
Loading...