The Hampton Bay Four-Wheel Hose Cart (SKU #541 632, Model #840) is a robust and practical solution designed to manage and transport garden hoses efficiently, enhancing home improvement needs. This use and care guide provides comprehensive instructions for assembly, operation, and maintenance, ensuring longevity and optimal performance of the product.
Function Description
The primary function of this device is to store and transport a garden hose, making it easier to use the hose around a property without kinking or tangling. It features a reel for winding the hose, a sturdy frame for mobility, and a handle for easy maneuvering. The integrated leader hose connects the main garden hose to the water source, allowing for convenient water distribution. The four-wheel design provides stability and ease of movement, even when the hose cart is fully loaded.
Important Technical Specifications
- Hose Capacity: Designed to hold up to 250 ft. of 5/8 in. garden hose.
- Wheel Type: Four pneumatic tires, requiring inflation.
- Maximum Tire Pressure: 15 PSI.
- Materials: Features a galvanized tee, brass swivel, and steel components with an industrial quality coating.
- Hardware: Includes various bolts (1.75 in. and 1.57 in.), lock nuts, wing nuts, axle washers, axle nuts, U-bushings, space washers, springs, crank handle, rubber handle with bolt, and an axle rod.
- Components: Consists of a spool, frame, tires, U-handle, leader hose, and axle rods.
Usage Features
- Easy Assembly: The manual provides clear, step-by-step instructions for assembling the frame, attaching the tires, assembling the galvanized tee, positioning the spool, attaching the spool and handle, attaching the spool to the water supply side, attaching the U-handle, attaching the leader hose, and finally, attaching the garden hose.
- Mobility: Equipped with four wheels, the cart offers excellent mobility, allowing users to easily move the hose around their garden or yard. The U-handle provides a comfortable grip for pushing or pulling the cart.
- Hose Management: The central spool allows for neat winding and unwinding of the garden hose, preventing kinks and tangles. The design ensures that the hose is stored securely and is readily accessible for use.
- Water Connection: The leader hose connects the main garden hose to the water source, and the brass adapter on the galvanized tee provides a secure connection point for the garden hose. Looping the hose over the spool end is recommended to avoid kinking at the connection point.
- User-Friendly Design: The crank handle facilitates easy winding of the hose onto the spool. The overall design prioritizes ease of use and convenience for the homeowner.
Maintenance Features
- Routine Maintenance:
- Rust Prevention: Users are advised to check for scratches on the hose cart and apply clear acrylic/weatherproof paint to delay rust formation. Despite the industrial quality coating, steel components can rust over time.
- Water Drainage: It is crucial to drain water from the hose reel before storing it, especially to prevent freezing temperatures from damaging the plumbing system.
- Water Flow Management: Do not leave water running through the reel when it is not in use or unsupervised. Always turn off the water after each use.
- Tire Inflation:
- Inflation Guidelines: The tires should be inflated to a maximum of 15 PSI.
- Safety Warning: A critical warning is provided against overinflation, as it can cause the tires to explode. A hand pump or bicycle pump is highly recommended for inflation, and extreme caution should be exercised if using a compressor, as pressure builds quickly in these small tires.
- Fixing a Leaking Swivel:
- Initial Leakage: Slight leakage from the swivel is normal until the O-rings are wet and seated.
- Troubleshooting Steps:
- If the leader hose is attached, unscrew it and inspect the inside of the swivel.
- Use a hex key or a large screwdriver to gently tighten the threaded insert in the hex opening to stop the leak. DO NOT OVERTIGHTEN!
- Check for a hose washer inside the nut if the unit still leaks. Replacement washers can be obtained from customer service or a hardware store.
- If the swivel is old, worn O-rings may be the cause. Contact customer service for a new set of O-rings.
- If these steps do not resolve the leaking issue, contact Hampton Bay Customer Service.
- Component Diagram: A detailed diagram illustrates the swivel components, including the shaft, O-rings, housing, snap ring insert, washer, and nut, aiding in understanding and troubleshooting.
Hampton Bay guarantees its products against defects in materials and workmanship. In case of a defect, they will repair or replace the item at their expense. However, the guarantee does not cover:
- Product damage due to abuse, misuse, or mishandling (e.g., exposing the unit to freezing temperatures with water in the plumbing system voids the warranty).
- Rust, as steel can rust over time despite quality coatings.
- Incidental or consequential damages or injury to persons or property not purchased from Hampton Bay.
- Damage from shipping, which should be claimed with the carrier.
Normal wear and tear of components like moving parts, seals, O-rings, wheels, hose, and connectors are not covered but replacement parts are available at a nominal cost. The warranty provides specific legal rights, which may vary by state.
Customer Support
For questions, problems, or missing parts, customers are encouraged to contact Hampton Bay Customer Service at 1-855-HD-HAMPTON or visit HAMPTONBAY.COM. Support is available Monday-Friday from 8 a.m. to 7 p.m. EST, and Saturday from 9 a.m. to 6 p.m. EST. The manual should be retained for future reference.
To Next Page
Need help?
General
