Han Seung HTS-AT10 - User Manual

※Please read the operating manual before
using for proper use and safety.
Digital Timer Operating Manual
HTS-AT10 Digital Timer
1. Description of Parts & Function Buttons
Model : HTS-AT10
Select Switch
Date/Time Display
Mode No./Status
Day of week
Mode Display
Function Buttons
Function Buttons
1)”Menu/Move”: Mode change & move cursor to right.
(Data reset after 5 seconds of continuous press)
I/O Terminal
2)” ▲ ” : No. Increment (Manual ON/OFF at initial display)
☞Manual “ON” will be set to “OFF” at next OFF time and
Manual “OFF” will be set to “ON” at next ON time
3)” ▼ ” : No. Decrement
4) “Save”:Save input data (check current date at initial display)
-1-
HTS-AT10 Digital Timer
2. Current Date/Time Change
: Mode is changed to “Current Date/Time” setting when electricity
Is supplied.
☞
Display is changed to initial display when
“
Save
”
button is
HTS-AT10 Digital Timer
3.Handy Functions
1)Turn the top “Select Switch” and select desired function
☞
Display
is
changed
to
initial
display
when
Save
button
is
Pressed after no change has been made.
☞Display is changed to initial display after 1 minute of no change.
☞Data and internal clock is maintained by the power shortage
recovery function.
① Set Month with “▲”, “▼”and
press “Menu/Move” once.
②
Set
Date
with
“
▲
” “
▼
”
and
①Weekly Timer : Various days & 25 ON,OFF times can
be set in 1 day.
②Weekly Pulse : Pulse difference & day can be set 24
times
③Yearly Timer:
Operating duration(Start date/End date &
10 ON,OFF times can be set in 1 day.
④Weekly Cycle : Repeating duration(Start day/hour,
dd h d h
③ Set Year with “▲”, “▼”and
press “Menu/Move” once.
②
Set
Date
with
▲
,
▼
and
press “Menu/Move” once.
④ Set Hour with “▲”, “▼”and
press “Menu/Move” once.
2)At Initial display(Current time) press “▲” to force ON/OFF
by overriding set time.
(☞Returns to set status after 1 day from forced ON/OFF)
en
d
d
ay/
h
our ) an
d
repeat ON
h
our,
repeat OFF hour can be set.
3)At Initial display(Current time) press “Save” to display
current date/time.(☞Returns to initial display in 5 secs)
4)Returns to initial display(current time) after 1 minute of
⑤ Set Minute with “▲”, “▼”and
press “Save” once.
※ Press “Menu/Move” to set the
Current Date/Time again
Initialize
-2- -3-
4)Returns
to
initial
display(current
time)
after
1
minute
of
no button pressing while changing internal data
5)Built in batteries enables power shortage
recovery function (semi-permanent)

Han Seung HTS-AT10 Specifications