then rinse it with clean water.
the product, and then clean the product with clean water at room
temperature.
using a dry cloth.
with a blower
Warm Tips
exceed 50°C.
leaking inside.
Decontamination powder and other cleaning products to wash
with boiling water.
Trockeneis
avoid the pressure rise in the cup.
scratch the product pattern, which is easy to cause
damage to the pattern.
heat sources.
instructions. Any other improper use may cause
Component
Name
Fan Cover,
Cup Cover,
Straw
USB Fan
Handle,
Seal ring
Cup body
Material
name
PP
ABS
Silicone
Tritan
Solder Heat
100°
100°
100°
100°
Material
To Next Page
Loading...