2 HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL
Pre-installation check list
1 Check that all of the required components
are available.
a Track Drawing f Seat
b Track g Fitting kit
c Stanchions h Footplate
d Feet accessories kit
e Power pack
Note: Before assembly you must ensure
that all of the required track is to the correct
specification, the stanchions supplied are the
correct length, the correct number have been
supplied and the corresponding number of
feet are available. In order to do this you need
to cross reference the items supplied to the
drawing supplied. Please refer to Appendix 4
for further details.
2 Installation tools required
Handicare 2000 Simplicity /
Style installation manual
Issue No of this manual is 0416-1
ORIGINAL LANGUAGE ENGLISH
• Loading toggle
• Loading bars
• Shorting links
• 8mm Spanner
• 13mm Spanner
• 17mm Spanner
• No. 2 Pozidrive
• No. 3 Pozidrive
• Nylon electricians
pull through – at
least the length of
the track
• Track Lubricant:
HTEP grease
(food safe grease)
• 2.5mm Allen key
• 3mm Allen key
• 4mm Allen key
• 5mm Allen key
• 6mm Allen key
(ball ended)
• Superglue
(inside track only)
• Torque wrench
•
1
/2" in-hex socket
driver – 8 x 120
•
1
/2" Racheting
socket wrench
• 2 x 250 mm socket
extension bar
• 1 x 125mm socket
extension bar
• T30 Torx driver
• 13mm podger
spanner
•
3
/8" Sliding
‘T’ Bar
Note: The installation engineer must check
with Handicare for the latest installation
manual issue number.
To Next Page
Loading...
