ENGLISH
Figure 122
Figure 123
HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL 45
Appendix 1
Maintenance
Items required: Tools required:
• Track lubricant: • None
HTEP grease
(food safe grease)
• Cleaning materials
1 Lubricate the rack with a small quantity of
lubricant:
a Apply a small amount of petroleum jelly at
4 equally spaced points along the rack of
both the top and bottom rails (Figure 122).
b Run the lift up and down the track several
times to distribute the lubricant.
Note: Do not use an oil based lubricant such
as WD40. It will damage the lift.
2 Lubricate the swivel mechanism with a small
quantity of petroleum jelly:
a Remove the seat by unscrewing the
retaining bolt (Figure 123).
b Apply lubricant to the nylon washer.
c Refit the seat and refit the retaining bolt
(Figure 123).
3 Check all of the safety features on the lift
as described in the Testing section of the
installation manual.
4 Check that the lift still stops as per the original
design.
5 Sit on the lift and rid e it up and down the
stairs several times:
a Listen for any unusual noises.
b Check for poor ride quality, especially
across the spliced joints.
6 Clean the track.
7 Clean the seat.
8 Clean the power pack.
If anything does not function correctly further
investigation and corrective action should be
undertaken.
To Next Page
Loading...
