Do you have a question about the Hangar 9 P-51 PTS Mustang Mk II and is the answer not in the manual?
Instructions for inspecting parts and preparing for the assembly process.
Aligning the aileron control horns and trim for neutral position.
Aligning the elevator control horn and trim for neutral position.
Steps for priming, starting, and initial idling of the engine.
Adjusting the high-speed needle for proper engine transition and RPM.
Adjusting the low-speed needle for smooth idle and transition.
Essential guidelines for safe operation and avoiding hazards.
Pre-flight checklist to ensure proper operation and safety.
Comprehensive safety guidelines and warnings for product use.