What to do if hot water bleeds into cold water supply with Hans Grohe Plumbing Product?
If hot water is bleeding into the cold water supply (or vice versa) in your house when using a Hans Grohe Plumbing Product, this is likely due to a faulty check valve. The suggested solution is to remove and clean the check valve. If cleaning doesn't resolve the issue, replace the check valve.
Why is the water temperature erratic with my Hans Grohe Pharo Skyline 26017XX1?
Erratic water temperature in your Hans Grohe Plumbing Product is often caused by a faulty thermostatic mixer cartridge. Replacing the thermostat cartridge should resolve this issue.
How to fix insufficient water flow in Hans Grohe Plumbing Product?
Insufficient water flow in your Hans Grohe Plumbing Product is often due to clogged filters inside the supply elbows. Remove and clean these filters to restore proper water flow.
What to do if Hans Grohe Plumbing Product drips and won’t shut off?
If your Hans Grohe Plumbing Product drips and won’t shut off completely, it indicates a faulty volume control cartridge. Replacing the volume control cartridge is the recommended solution.
Why does Hans Grohe Pharo Skyline 26017XX1 Plumbing Product output both hot and cold water, but no mix?
If your Hans Grohe Plumbing Product is outputting both hot and cold water without mixing, the supply lines are likely connected to the incorrect elbows. Reconnect the supply lines to the correct elbows to fix this.
General| Product Type | Shower Panel |
|---|---|
| Brand | Hansgrohe |
| Series | Pharo Skyline |
| Model Number | 26017XX1 |
| Material | Brass |
| Installation Type | Wall Mounted |
| Finish | Chrome |
| Flow Rate | 2.5 GPM |
| Water Connection | 1/2 inch |
| Warranty | 5 years |
| Features | thermostatic control |
Details water pressure, flow rates, temperatures, and installation recommendations.
Suggested dimensions, package contents, and rough-in steps for water supply connections.
Guides on wall mounting, drilling, anchoring, sealing, and connecting water supply hoses.
Instructions for handshower installation, top cover, and adjusting the thermostatic mixer.
How to operate overhead, neck, handshower, and bodyspray functions individually.
Details on using multiple sprays simultaneously and adjusting water temperature.
Steps to open the showerhead, adjust its angle, and align the cover.
Information on the Rubit™ self-cleaning system, general cleaning, and maintenance notes.
Solutions for common issues, plus identification of replaceable parts with numbers.
Details on warranty coverage, exclusions, limitations, and how to obtain service.
To Next Page