To Next PageTo Next Page
Need help?Do you have a question about the Hans Grohe Talis E and is the answer not in the manual?
General| Material | Brass |
|---|---|
| Finish | Chrome |
| Brand | Hansgrohe |
| Series | Talis E |
| Number of Handles | 1 |
| Warranty | Limited Lifetime |
| Product Type | Bathroom Faucet |
| Flow Rate | 1.2 GPM |
| Spout Reach | 5.5 inches |
| Handle Type | Lever Handle |
| Spray Type | Aerated |
| Water Connection | 3/8 inch |
Wear gloves during installation to prevent crushing and cutting injuries.
Product is for bathing, hygienic, and body cleaning purposes only.
Hot and cold water supplies must be of equal pressures.
Inspect for transport damages before installation; post-installation damage won't be honoured.
Install, flush, and test pipes per applicable standards and country codes.
Use drain valve as intended; do not attach other objects.
EcoSmart flow limiter can be removed to increase water flow.
Max operating pressure 1 MPa, recommended 0.1-0.5 MPa, test pressure 1.6 MPa.
Max hot water temp 70°C, recommended 65°C. Thermal disinfection 70°C/4 min.
Product is exclusively designed for drinking water.
Do not use silicone containing acetic acid.
Pointers to pages for dimensions, flow diagrams, spare parts, accessories, operation, and cleaning.
Mentions special tool #58085000 and installation putty.
Illustrates mounting the faucet body to the sink surface.
Shows securing the fixture from underneath with nuts and washers.
Depicts connecting hot and cold water supply hoses to the faucet.
Details attaching the soap dispenser and connecting hoses.
Shows tightening nuts for securing the soap dispenser and faucet.
Illustrates correct installation and tightening of water hoses.
Shows the process of attaching the aerator assembly to the faucet.
Illustrates applying grease to seals for smooth operation.
Shows the installation of the drain assembly with proper tightening.
Illustrates the final tightening of the drain assembly.
Shows a test for water flow and temperature, ensuring proper function.
Provides detailed measurements for the Talis S model.
Provides detailed measurements for the Talis E model.
Illustrates flow rate (Q) versus pressure (MPa) for EcoSmart and standard models.
Exploded view of the Talis S faucet with numbered parts and codes.
Exploded view of the Talis E faucet with numbered parts and codes.
Multilingual terms for opening and closing the faucet.
Multilingual terms for hot and cold water.
