- 45 -
9. Press button for 3 seconds to switch o your appliance and the
button illumines, power is cut o. Internal lamps eliminates, com-
pressor stops working. Press the button for 3 seconds to switch on
your appliance, the symbol shines and power is connected again.
10. Fault display and alarm- This appliance has ‘fault display & alarm’
function. Once the sensors got fault, there are alarms displayed on
the temperature displaying.
11. Temperature regulation in AdaptZone crisper- Touch few times
C
button to set temperature inside the AdaptZone chamber between
-3
O
C to 3
O
C.
To Next Page
Loading...