Hantek HDG3000BC Series - Page 92

Input Range
AM, DSB-AM, FM, PM, OSK, PWM: 75MVRMS ~ ± 5VAC + DC
ASK, FSK, PSK: TTL level
Input
Bandwidth
50KHz
Input
Impedance
10kΩ
Sweep Characteristics
Carrier
Waveform
Sine, Square, Ramp, Pluse, Harmonic, Arb. (except DC)
Type
Linear
Type Direction
Up
Sweep Time 1ms ~ 50Ks
Hold/Return
Time
1ms ~ 50Ks
Trigger Source Internal, External, Manual
Mark Falling Edge of Sync signal
Burst Characteristics
Carrier
Waveform
Sine, Square, Ramp, Pluse, Harmonic, Arb. (except DC)
Carrier
Frequency
1uHz~100MHz
1uHz~80MHz
1uHz~60MHz
1uHz~40MHz
1uHz~25MHz
1uHz~15MHz
Burst Count 1 ~ 2000 000 000
Start/Stop
Phase
0° ~ 360°
Internal Period 2μs ~ 500s
Gated Source External trigger
Trigger Source Internal, External or Manual
Counter
Function
Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
Frequency 1uHz ~ 80MHz
Gate time 10ms ~ 16s
Level 0 ~ 3.3V
Trigger Characteristics
Trigger Input
Level TTL - compatible
Slope Rising or falling (selectable)
User Manual 87