The Happyhaves "Release the Fire Within" Diffuser is a premium aromatherapy product designed to enhance well-being through the use of essential oils. It is part of a holistic wellness brand that focuses on creating high-quality, eye-catching, and eco-friendly products to help individuals live more mindfully and feel more connected.
Function Description:
The primary function of the Happyhaves "Release the Fire Within" Diffuser is to atomize essential oils and diffuse them into the air, creating an aromatic atmosphere. It also features a flame-like light effect, designed to provide a warm and calming visual experience. This diffuser is intended to improve mood and overall well-being, making it suitable for use at home, in an office, or during activities like yoga and meditation. The brand emphasizes spreading "holistic happiness" by inspiring a more natural and connected way of living.
Important Technical Specifications:
- Model: DQ701
- Current: ≤900mA
- Rated Power: ≤4.5W
- Weight: 90g
- Input: DC5.0V/2A
- Size: 171x75x101mm
- Water Tank Volume: Maximum 180 ml. It is crucial not to exceed the maximum water level indication line to prevent affecting atomization or causing water leakage and damage to the diffuser.
- Materials: High-quality and BPA-free plastic.
- Power Cord: Uses a Type-C 2A power cord (included).
Usage Features:
The diffuser is designed for straightforward operation with a few key steps:
- Preparation: Remove the upper lid cover (Shell) of the diffuser.
- Power Connection: Plug the Type-C adapter into the bottom of the diffuser.
- Water and Essential Oils: Add plain tap water up to 80% of the water tank's capacity (up to the Max. line). Then, add 8-10 drops of organic essential oils. It is important to only use tap water and avoid mineral or sparkling water.
- Atomization (Mist) Control: Press the atomization switch to turn on the aromatherapy atomization.
- Light Control:
- Short press the light button to turn on the flame atmosphere light.
- Press and hold the light button again to increase the brightness by 30%.
- Short press the light button once more to turn off the atmosphere light.
Important Usage Guidelines:
- Always place the diffuser on a stable, flat surface.
- Do not switch on the power when adding water or when the tank is empty.
- Avoid touching the ultrasonic vibration plate.
- Unplug from the power supply before any maintenance.
- Do not place the diffuser under furniture, clothing, or near walls.
- Keep away from direct sunlight, heat sources, and air conditioners.
- Keep away from electronic equipment.
- Ensure the power cord is clear of pathways and do not pull it forcefully.
- If smoke or a burning smell is detected, unplug the device immediately.
- Keep out of reach of children and pets.
- Never move the product while it is in use, and avoid touching any part with wet hands.
- The sound heard during operation is the normal sound of atomization.
Maintenance Features:
Regular cleaning is essential to prevent malfunction and ensure optimal performance. The manufacturer recommends cleaning the diffuser after 5-6 uses or every 3-5 days of continuous use.
Cleaning Steps:
- Unplug and Remove Cover: Unplug the diffuser from the power source and remove the top cover.
- Empty Water: Pour out any remaining water from the tank.
- Clean Tank: Add a small amount of eco-friendly soap and water to the tank. Use a swab to gently clean the interior.
- Dry: Use a cleaning cloth to lightly dry the tank.
Important Maintenance Note:
Always clean the diffuser on a stable surface to prevent water from flowing into the air outlet. Proper care of the diffuser will ensure its longevity and continued performance.
Troubleshooting:
The manual provides a troubleshooting guide for common issues:
- Will not switch on or switch off: Check if there is enough water in the tank and if the power cord is properly connected. Add water if needed, and disconnect/reconnect cables carefully.
- No mist or abnormal mist: This could be due to insufficient or excessive water (water should not exceed 500ML MAX line), dirt on the ultrasonic plate, or improperly installed covers. Clean the ultrasonic plate as per maintenance instructions, ensure covers are correctly installed, and clean any dust from the air suction port.
- Water leakage from product: This is typically caused by improperly installed covers or low temperature/high humidity, which can cause mist to condense quickly into water droplets. Remove and reinstall covers correctly.
Need help?
General
To Next Page