HARDER & STEENBECK infinity User Manual

HARDER & STEENBECK infinity

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Bedienungsanleitung

Instructions for use

Mode d’emploi

Handleiding

Driftsanvisningar

Инструкция по эксплуатации

Istruzioni per l’uso

Instrucciones de servicio

Οδηγίες χρήσης

Questions and Answers:

J
johnwilkinsJul 29, 2025
What to do if my HARDER & STEENBECK infinity Airbrushes does not spray any paint?
- M
  Michael HortonJul 29, 2025
  If your HARDER & STEENBECK Airbrush isn't spraying paint, first, ensure the paint reservoir is full. Next, check the needle securing nut and tighten it if necessary. If the issue persists, try this: unscrew the end piece, loosen the needle securing nut, push the lever downwards, and gently move the needle forwards and backwards a few times. Then, fully reinsert the needle, tighten the securing nut, and reassemble the end piece. Also, make sure to clean the nozzle and needle. Finally, consider thinning the paint if it's too thick.
V
Vanessa CallahanAug 7, 2025
How to fix air pockets or bubbling in the paint cup of HARDER & STEENBECK infinity?
- J
  Jacqueline NielsenAug 7, 2025
  If you're experiencing air pockets or bubbling in the paint cup of your HARDER & STEENBECK Airbrushes, try tightening the air head more firmly into position. If that doesn't solve the issue, clean the nozzle and nozzle seal or replace the nozzle and nozzle seal.
D
Douglas ClineAug 16, 2025
What to do if lever jams on HARDER & STEENBECK infinity Airbrushes?
- B
  Brent BarkerAug 16, 2025
  If the lever on your HARDER & STEENBECK Airbrushes is jamming, or if air regulation is impossible, start by cleaning the components. If the problem persists, unscrew the air valve and oil the seal on the valve rod.

HARDER & STEENBECK infinity Specifications

General

Brand	HARDER & STEENBECK
Model	infinity
Category	Airbrushes
Language	English

Summary

Correct Use and Safety

Safety Instructions

Essential safety guidelines for proper operation and hazard avoidance.

Initial Setup and Operation

Connecting the Airbrush

Instructions for connecting the airbrush to a compressed air source.

Recommended Air Pressure

Optimal air pressure settings based on paint and surface.

Maximum Air Pressure Limit

The highest safe air pressure for the airbrush.

Airbrush Functionality Explained

Double Action Mechanism

How to use the dual control for air and paint.

Quick Fix Paint Adjustment

Using the Quick Fix feature for paint flow control.

Lever Sensitivity Adjustment

Adjusting the trigger's sensitivity for precise control.

Basic Airbrush Techniques

Fine Line Drawing

Technique for creating thin, precise lines without blotting.

Broad Line and Gradient

Method for creating wide lines and smooth color transitions.

Looping Technique

Creating loops with varying paint volume and distance.

Spray Spot Technique

How to create dots or spots with the airbrush.

Cleaning and Maintenance Procedures

Intermediate Cleaning

Quick cleaning steps between uses to maintain performance.

Thorough Cleaning

Detailed cleaning process for longer breaks or storage.

Advanced Maintenance Tips

Troubleshooting Airflow Issues

Air Bubbles or Spitting

Diagnosing and fixing air pockets or bubbling in the paint cup.

No Paint Spray Output

Steps to resolve issues when the airbrush fails to spray paint.

Troubleshooting Control and Pattern

Lever Jamming or Air Control

Resolving problems with the trigger mechanism or air regulation.

Poor Spray Pattern or Splattering

Addressing issues causing uneven spray or splattering.

Spider Leg or Millipede Effect

Fixing spray patterns that resemble spider legs or millipedes.

Warranty and Compliance Information

24-Month Guarantee Details

Information on the warranty period and coverage for defects.

EC Declaration of Conformity

Statement confirming the product's compliance with EU directives.

Components and Spare Parts Identification