Harman Kardon AVI 250 - Remote Control Functions; Basic Remote Operations; Tuning, Source-Specific Functions, and Copying

ENGLISH
@ UselLearn: This switch selects
the operation mode of the remote
control. Slide it to the left for normal
operation. Slide it to the right when
the remote is being programmed.
@ Main Power: Press these
buttons to turn the unit on or off.
® Source Selection: Pressing one
of these buttons selects the input
source that will be listened to
through the receiver. When a source
is selected the remote’s transport
and numeric number buttons will
also transmit the commands needed
to control that machine.
@> Source Power: Press these but-
tons to control power for the last
source device selected.
@ Surround Mode Selection:
Press one of these buttons to select
a surround mode for the current lis-
tening session.
@® Main Volume: These buttons
control the unit's volume. Note that
all channels are controlled simulta-
neously.
@ TV Volume: These buttons
adjust the volume for TV using the
remote control codes programmed
into the remote for a TV set or cable
box. These buttons control the TV
set only, regardless of which source
is selected. This enables you to con-
trol the audio level of a TV set even
when the receiver is not in use.
@® Mute: Press this button to tem-
porarily cut the unit's audio output.
Press it again to return to the previ-
ous volume level.
Remote Control Functions
8
NOTE: The ability of the remote to
control source equipment, such as
tuners, CD players and tape decks
may vary with the compatibility of
the product under control with
the preprogrammed codes in the
AVI 250’s remote. If the unit does
not respond with the function
described here, it may be neces-
sary to reprogram the remote using
the “Learning” function described
elsewhere in this manual.
@© Transport Controls: These
buttons control the tape or disc
motion of the last playback source
selected with the Source Selection
buttons @. Use them as you would
the Play, Stop, Pause, Reverse Play
and Record buttons on any VCR, CD
or LD remote control.
@® Tune/Search & Fast Forward:
(These buttons have multiple func-
tions, which vary according to the
input device selected.)
a. When a TUNER has been select-
ed, these buttons are used to
manually tune stations.
b. When CD, LD or VCR is the input
source, these buttons act as
the Fast Scan Forward te
or Fast Scan Reverse —«—_
controls.
@ Channel/Skip: (These buttons
have multiple functions, which
vary according to the input device
selected.)
a. When TUNER has been selected,
these buttons will scroll up m4 or
down «a through the stations
that have been programmed in
preset memory.
b. When TV or VCR is selected, they
are the channel up 1 or chan-
nel down Kt tuning buttons.
c. When CD or LD is selected
these buttons act as forward
and reverse “Skip” buttons to
move to the next track or chapter
on the disc.
d. When a compatible Harman
Kardon cassette player has been
selected as Tape 1 or Tape 2,
these buttons move the tape for-
ward me or backwards Ka to
the next selection using the Music
Scan feature.
@ Disc/Deck/Ant: (These buttons
have multiple functions, which
vary according to the input device
selected.)
a. When CD is selected and the unit
is aCD changer, these buttons
will change to the next disc + or
previous disc —.
b. When Tape 1 or Tape 2 is the
input source, and the tape
machine is a compatible Harman
Kardon dua! cassette deck, these
buttons will switch between the
“A” and “B” sides.