4. Power on the BDS unit, and run software tool “Rpower.exe”
5. Scan the 2D barcode on the loader into the “Bar Code” text field.
Example of a 2D code read-out:
“00022CAAA06E5E55B2B0B070
CE01F0119FAD4F255F13131A
00F701121B000590”
Do not use the number on the label.
Make sure that the software tool’s Com Port No. is the same as the PC’s Com Port No!
Tips to read the barcode: Take an image of the barcode with another smartphone or camera,
enlarge the image on its display. Now it is easier to scan this enlarged barcode image.
6. Press “Write” button shown on PC screen image above to start the initialization.
To Next Page
Loading...
