13 SETUP AND CONNECTIONS
SETUP AND CONNECTIONS
If the video display has component video inputs, con-
nect the component video outputs on the DVD 25/101 to
the corresponding input jacks on your television. If you
are using a Progressive Scan television or projector,
you must also change the scan type in the DVD
player’s Video Setup menu from “Interlaced”to
“Progressive.”See page 17.
VIDEO OUT/COMPONENT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
20
Y / Y
Pb/ Cb
Pr/ Cr
120V/60Hz
1
TV or Monitor
To power outlet
(AC 120V/60Hz)
To component
connectors
To analog audio input connectors on TV or receiver
(red/white, optional only, see
NOTE on page 13).
To optical or coaxial
digital input of receiver or
processor. Only one digital
connection is required,
and either may be used.
DVD 25/101
Connecting to a TV or Monitor With Component Connectors – Component Video Connection
DVD25/DVD101 harman/kardon
To Next Page
Loading...
