Harman Kardon DVD 47 Connection Guide

DVD 47 CONNECTION GUIDE
Connecting to a TV Only
When using the DVD 47 with a television but no audio receiver or processor, connect it as follows.
Make the Analog Audio Connection å and one of the Video Connections (Composite Video ∫,
S-Video ç, Component Video ∂).
If your television or video display is HDMI-capable, you only need to make the HDMI é connection,
as it handles both audio and video.
Remember to plug in the power cord.
IMPORTANT NOTE: Make certain that any device being connected, including the DVD 47, your receiver or
processor and your TV or video display, is turned off whenever you make connections between products.
DVD47WebDiagrams1 5/3/06 2:16 PM Page 4

Harman Kardon DVD 47 Specifications

General

Type	DVD Player
Audio Formats	Dolby Digital, DTS
Progressive Scan	Yes
Remote Control	Yes
Disc Formats	DVD-R/RW, CD, CD-R/RW
Video Output	Composite, S-Video, Component
Audio Output	Analog Stereo, Coaxial Digital, Optical Digital
Audio DAC	24-bit/192 kHz