Harman Kardon ENCHANT 1300 - Connecting to Power: Subwoofer; Soundbar Power-Up Sequence; Powering On the Subwoofer

/ CONNECTING TO POWER
24
 
wall socket.
• “LOADING” scrolls on the display panel. The soundbar
will take about 30 seconds to load, then enter standby

 

with correct polarity orientation. Slide the cover back into
position.
 Press (Power) to power on the soundbar.
• “ON” is displayed.
Power On the Subwoofer (Optional)
 Plug one end of the power cord into the AC IN connector
on the back of the subwoofer.
 
outlet.