FRONT-PANEL CONTROLS 5
Front-Panel Controls
1
Main Information Display: This display
delivers messages and status indications to help
you operate the CD player.
2
Power On/Off (Standby): Press the button
once to turn the CD player on, press it again to
put the unit in the Standby mode.
3
Open/Close: Press this button to open or
close the Disc Tray.
4
Play: Press to initiate playback or to resume
playback after Pause has been pressed.
5
Pause: Press this button to momentarily
pause playback. To resume playback, press the
button again. If a CD is playing, the sound will
be muted.
6
Stop: Press this button to stop the disc
currently being played or to exit program mode
(see page 13 for complete information).
7
Skip/Search (Previous): Press this button
to move backward through the music tracks on
a CD disc. Keep the button pressed to search
backwards at one of the available speeds.
8
Skip/Search (Next): Press to move forward
through the music tracks on a CD. Keep the
button pressed to search forwards at one of the
available speeds.
9
Dimmer: Press this button to reduce the
brightness of the Information Display by 50% or
to turn the display off completely in the
following order: FULL BRIGHTNESS ➜ HALF
BRIGHTNESS ➜ OFF ➜ FULL BRIGHTNESS.
Important Note: When the unit is turned off
(to Standby), pressing the Play button
4
9
on the front or on the remote will automatically
turn on the player and start playback.
1
2
3
4
5
6
7
8
9
Main Information Display
Power On/Off (Standby)
Open/Close
Play
Pause
Stop
Skip/Search (Previous)
Skip/Search (Next)
Dimmer
To Next Page
Loading...
