Digital Output
Audio Outputs
Remote Control Input
Remote Control Output
AC Power Cord
¡ Digital Output: Connect this jack to the
coaxial digital input of an external digital-to-ana-
log converter for direct access to the digital signals
of the HD750. DO NOT connect this jack to the
standard audio inputs of any device.
™ Audio Outputs: Connect these jacks to the
CD audio inputs of your receiver, surround
processor or preamplifier.
£ Remote Control Input:
Connect the output of a remote infrared sensor
or the remote control output of another compati-
ble Harman Kardon product.This will enable the
remote control system to operate even when the
front panel Remote Sensor
3
is blocked. It
will also allow use of the HD750 with optional,
external control systems.
¢ Remote Control Output: Connect this
jack to the input of another compatible Harman
Kardon remote controlled device to have the
remote sensor on the HD750 provide signals to
other products.
∞ AC Power Cord: Connect this plug to an
AC outlet. If the outlet is switch controlled, make
certain that the switch is in the ON position.
To Next Page
Loading...
