Harman Kardon hk990Vxi - Page 10

hk88BOVxi
/;
hkKOoOIOOVXI
Set-Up
AVIS: RISQUE DE CHOC
___ELECTRIQUE-NE PAS OUVRIR NE PAS OUVRIR
Unweaw
LO}
EXTERNAL
PROCESSOR AC 120V SOH2/60H2
TSBIES 360W 460VA
NEW YORK
MADE IN JAPAN
Figure 4 hk990Vxi Rear Panel
Save
all
packing
material
from
your
new
receiver.
While
the
At
the
top
left
of
the
receiver
is
a
GROUND
terminal.
It
box
is
quite
large
and
may
be
a
nuisance
to
store,
it
is
essential
should
be
connected
to
the
ground
wire
on
your
turntable
cable
for shipping
if you move
or
should the
unit
ever
need
repair.
to prevent
audible
hum.
Also be sure to fill out the warranty card and save your sales
receipt in a safe place. It is necessary to establish the date on
which your warranty begins, and as proof of ownership in the
event of something drastic such as fire or theft.
First make sure that the receiver and all other components are
switched off.
Take care to match left and right component plugs with the left
and right input jacks on the back of the receiver. Common
The
hk880Vxi
and
hk990Vxi
are
fully
shielded
and
may
be
practice
is
to
treat
the
red
plug
as
right
and
the
grey
(or
black
placed on top of or under other stereo components, provided or white) plug as /eft.
that their 3/8-inch “feet” provide sufficient clearance for the
cooling needs of the component below.