Harman Kardon HKTS200SUB - HKTS 210 SUB Trigger Voltage Source Connection

11
HKTS 60BQ/230
LEFT
LFE SUB
OUTPUT
12V
TRIGGER
OUTPUT
+– +–
+ –
+–
+ –
+–
+ –
RIGHT
SURROUNDFRONT CENTRE
ENGLISH
Trigger Cable
(Black Ends)
Speaker Connections
Receiver
Subwoofer
Connecting to a Trigger-Voltage Source
If your preamp/processor or another audio/video component has a trigger-voltage
connection that supplies between 3V and 30V (AC or DC), connect it to the HKTS 210SUB’s
External Trigger Input 5 . If the component’s trigger-voltage connection has a
3.5mm mini jack, you can use the supplied combination LFE/trigger cable to make the
connection.
NOTE: Please do not connect the subwoofer ON/OFF trigger cable to the Remote Control
Output (IR Out) of your home cinema system or surround receiver. Doing so could lead
to malfunction.
Harman Kardon
HKTS 20+30+60 Service Manual
Page 32 of 49