PLAYING DVDs AND CDs
PLAYING DVDs AND CDs 21
figuration. When you press the Enter Button P,
a series of numbers will appear. Press the
M
/
N
Navigation Buttons A to change the numeric
indication while noting that a description of the available
options appears at the top left corner of the on-screen
display. When your desired selection appears, press
the Enter Button P and then press the
M
/
N
Navigation Buttons A so that DONE is high-
lighted and then press the Enter Button Q again
to remove the on-screen display and return to normal
playback.
Notes on Audio Tracks:
• Not all discs contain multiple audio track choices.
Check the information on back of the disc jacket to
see what audio languages or format options are
available.
• Some DVDs do not allow direct selection of the
audio track during playback. For these discs, you
must change the audio track using the disc’s menu
system. Press Disc Menu Button Q to display
the disc’s menu and then use the
M
/
N
/
K
/
L
Navigation Buttons A to make your selec-
tion following the navigation scheme of the
individual disc.
• When you change the audio track or language with
the Audio Select Button on the remote con-
trol as shown above, you only override the audio lan-
guage setting established in the Audio Setup menu
for the disc currently being played. The unit will revert
to its default setting with the next disc.
Selecting or Changing the Subtitle (DVD-Video
Discs Only)
Many DVDs contain one or more subtitles. The default
subtitle is set in the System Setup menu as described
on page 12, but you may also turn the subtitles on or
off or change the language at any time during a disc’s
playback.
To change the subtitle language or turn the subtitles
on or off, press the Subtitle Button 8 to show
the current configuration. When you press the Enter
Button P the available subtitle choices will appear.
Press the
M
/
N
Navigation Buttons A to highlight
your choice from the available languages or select
OFF turn the subtitles off. When your desired selec-
tion appears, press the Enter Button P and then
press the
M
/
N
Navigation Buttons A so that
DONE is highlighted and then press the Enter
Button P again to remove the on-screen display
and return to normal playback.
Selecting an Angle (DVD-Video Discs Only)
An increasing number of DVDs contain multiple-angle
views, which allow the disc’s creators to provide differ-
ent views of the same scene, or to present additional
on-screen or interactive information. In many cases the
disc will alert you to the presence of multiple angles by
showing a camera icon or other indication, but in any
case where multiple-angle material is available, the
Angle Indicator I will light in the front-panel
Information Display 9.
When multiple angle views are available as shown
by any of the available icons or indications, press the
Angle Button L to change the view. An information
box will appear in the upper right corner of your video
screen to show you which angle view is playing and
how many are available.
Repeat Play
The HS 100 offers a number of repeat functions that
allow you to set the player so that it automatically
repeats a title, chapter or selected segment of the
disc (“Repeat A-B”).
To repeat the current title or chapter, press the Repeat
Button 4 to bring a control bar to the top of the
screen. When it appears, press the Enter Button P
and then press the
M
/
N
Navigation Buttons A
to highlight your choice of either 1 to repeat the cur-
rent chapter or TITLE to repeat the current title
or Group to repeat the current Group for DVD-Audio
discs. For CDs, the options are 1 to repeat the current
track, or ALL to repeat the entire disc until the play-
back is stopped or the function is turned off. To turn
off the repeat play function, highlight the word OFF.
When your desired selection appears, press the Enter
Button P and then press the
M
/
N
Navigation
Buttons A so that DONE is highlighted and then
press the Enter Button P again to remove the on-
screen display and return to normal playback.
To program an “A-B” repeat, which selects any portion
of a disc for continual playback, press the A-B Repeat
Button at the start of the section to be repeated,
and press it again at the end of the segment to be
repeated. The disc will then play back the part of the
disc that elapsed between the times the button was
pressed until the Stop Button I is pressed.
Information Display
To view a screen with complete information about the
disc being played, press the OSD Button O and
then use the
M
/
N
Navigation Buttons A to high-
light the Info icon. Press the Enter Button P to call
up the screen.
The information shown is a mix of the settings for the
player and the contents of the disc, as follows:
• Disc: This shows the type of disc being played.
• Disc ID: If the disc is encoded with its title, that
information is shown on this line.
• Aspect Ratio: This line shows the aspect ratio of the
programming recorded on the disc, and the way in
which it is being played back according to the setting
established in the Video Setup menu as shown on
page 14. Note that some discs may contain two
versions of the same program with a widescreen
aspect ratio on one side and a standard aspect ratio
on the other.
• Video Standard: The disc’s format is shown here.
For the HS 100, this will always be the NTSC format
used in North America, as that is the only format
activated for Region 1 players.
• Scan Type: This line shows the scan rate of the
programming recorded on the disc, and the way in
which it is being played back according to the setting
established in the Video Setup menu, as shown on
page 14.
• Audio Resolution: This line shows the sample
rate and bit rate for the audio track being played
on the disc.
• Audio Format: This line shows the audio format
being played.
• Video Bit Rate: The number of blue horizontal lines
inside the white bar on this line gives you an indica-
tion of the video bit rate of the material being played
back up to the limit of 10 Mbps. This indication will
vary as a disc is played in response to changes in
the amount of compression that was applied to the
video signal when it was compressed during the disc
creation process.
• Audio Bit Rate: The number of blue horizontal lines
inside the white bar on this line gives you an indica-
tion of the audio bit rate of the material being played.
When you are finished reviewing the material on
the Disc Info screen, you may use the
M
/
N
/
K
/
L
Navigation Buttons A and then the Enter Button
P to select another menu to adjust a setting or pro-
gram this disc, or press the Clear Button N to
remove the display from your screen.
To Next Page
Loading...
