TUNER OPERATION
28 TUNER OPERATION
When the Radio menu is on the video display, you may
also use the
M
/
N
/
K
/
L
Navigation Buttons A
to move up and down the Station list in the center of
the screen. When the desired station is highlighted,
press the Enter Button P to select it for
listening.
RDS Information
RDS, which stands for Radio Data Service, is a special
data signal broadcast by many FM stations to show the
name of the station, or other data identification infor-
mation that the station may choose. The RDS function
is set to ON as a default, so that once a station is
tuned, the RDS information will appear if it is available.
You may add a station’s RDS information (if available)
by pressing the
M
/
N
/
K
/
L
Navigation Buttons
A so that the station’s preset number in the center
“Station” column of the Radio menu is highlighted
and then pressing the Status Button B. Within
five seconds press the Enter Button P, and if
RDS information is available it will be entered into
the HS 100’s memory.
Important Note: When a station name does not
appear, there is nothing wrong with your HS 100;
that simply means that the particular station is not
transmitting RDS data.
Surround Mode
As with all inputs on the HS 100, you may select a
surround mode for radio listening. Note, however, that
since the AM tuner is Mono only, no other surround
modes are available for AM listening. To change the
surround mode for FM listening, follow these steps:
1. With the RADIO menu on your video display,
press the
M
/
N
/
K
/
L
Navigation Buttons A
as needed so that the Info icon at the top of the list
of items in the Submenus section of the screen ∫
is highlighted by a white outline box.
2. Press the Enter Button P and then press the
M
/
N
/
K
/
L
Navigation Buttons A so that
the current surround mode to the right of the Audio
line at the top of the menu screen is highlighted.
3. Press the Enter Button P, and within five
seconds press the
M
/
N
Navigation Buttons A
so that the desired surround mode is highlighted.
4. Press the Enter Button P to set that mode as
the new default for FM listening.
To Next Page
Loading...
