14
Take Control
Overview
The Take Control software employs the
power of your computer to help you
define and configure settings on your
system controller—beyond the capabili-
ties of the TC1000 system controller
alone.
You can customize individual preferences
for each activity and redefine the way in
which buttons work.
To set up the Take Control software:
1 Start the Take Control software.
2 Connect the TC1000 to your
computer.
Starting the Software
You can start the Take Control software
in seconds. Take a moment to review the
minimum computer system requirements,
described within “Technical Specifica-
tions,” page 34, and ensure that your
computer system is compatible with the
software.
Note Starting the Take Control software auto-
matically installs a minimum set of files onto your
hard disk. To remove them, see “Removing the
TC1000 Files Copied onto Your Hard Disk.”
Starting the software requires use of the
TC1000 compact disc.
To start the TC1000 software:
1 Insert the TC1000 compact disc into
your CD-ROM drive.
2 Answer the questions in the wizard
that appears on your screen. If the on-
screen wizard does not start automati-
cally, click the Start button, click Run,
and then type <drive>:\TC1000.exe.
For example, if the compact disc is in
drive E, type E:\TC1000.exe.
Removing the TC1000 Files Copied
onto Your Hard Disk
You may choose at some point to remove
the TC1000 files from your hard disk.
To remove the TC1000 files:
1 Click the Start button, click Settings,
and then click Control Panel.
2 Double-click Add/Remove Pro-
grams, select TC1000, and then click
Add/Remove.
Setting Up Take Control with a Computer
76009mnl2.p65 9/1/98, 2:27 PM14
Black
To Next Page
Loading...
