16
Take Control
Using Take Control with Your Computer
If you added a device using only Take
Control, the Setup Wizard automatically
appears on your computer screen the
first time you connect Take Control to
your computer, giving you an opportunity
to enhance the setup by adding or
removing buttons.
Once you complete the Setup Wizard,
you proceed to the Take Control Editor,
which enables you to customize the set-
tings in the TC1000. Subsequently, when-
ever you insert the TC1000 compact disc
into your CD-ROM drive, the Take Con-
trol Editor starts automatically.
When you connect Take Control to your
computer, you are prompted to synchro-
nize any changes that you made on the
unit itself or in the TC1000 software. If
you accept, the updated data is trans-
ferred between the computer and the
TC1000. For example, if you create a new
activity in the TC1000 software, it is
transferred to the TC1000.
If you would like additional information
at any time, you can refer to the Online
User’s Guide for detailed information,
which you can start by clicking Help.
Welcome Screen
76009mnl2.p65 9/1/98, 2:27 PM16
Black
To Next Page
Loading...
