Harman AMX DVX Series - Page 135

130
NO Command Syntax Example
9 DXLINK_ETH
Command:
SEND_COMMAND <DEV>,
“’DXLINK_ETH-<OFF|AUTO>’”
Return:
DXLINK_ETH-<OFF|AUTO>
Description:
Instructs the DXLINK output port to
disable Ethernet traffic or go to auto
mode. In auto mode, Ethernet traffic
is controlled after PDIF negotiation.
Command:
SEND_COMMAND
VIDEO_OUTPUT_3,
“’DXLINK_ETH-AUTO’”
Return:
DXLINK_ETH-AUTO
10 ?DXLINK_ETH
Command:
SEND_COMMAND <DEV>,
“’?DXLINK_ETH’”
Return:
DXLINK_ETH-<OFF|AUTO>
Description:
Requests the control setting for the
DXLINK output port
Command:
SEND_COMMAND
VIDEO_OUTPUT_3“’?DXLI
NK_ETH’”
Return:
DXLINK_ETH-AUTO
11 DXLINK_IN_ETH
Command:
SEND_COMMAND <DEV>,
“’DXLINK_IN_ETH-<OFF|AUTO>
’”
Return:
DXLINK_IN_ETH-<OFF|AUTO>
Description:
Instructs the DXLINK input port to
disable Ethernet traffic or go to auto
mode. In Auto mode, Ethernet traffic
is controlled after PDIF negotiation.
Command:
SEND_COMMAND
VIDEO_INPUT_5,
“’DXLINK_IN_ETH-AUTO
’”
Return:
DXLINK_IN_ETH-AUTO