— Android device
6. SOUND SETTING
This section helps you choose the ideal sound for your video or music.
Before you start
Make the necessary connections described in the user manual.
On the soundbar, switch to corresponding source for other devices.
Adjust the volume
Press VOLUME +/- button to increase or decrease a volume level.
To mute sound, press MUTE button.
To restore the sound, press MUTE button again or press VOLUME +/- button
Choose sound effect
1. Surround sound mode
Experience an immersive audio experience with JBL surround sound mode.
Press SURROUND button to turn surround mode on or off.
On: Create a surround listening experience.
Off: Two-channel stereo sound. Ideal for listening to music.
2. Bass
Change low frequency (bass) settings of the soundbar.
Press BASS +/- to change the subwoofer volume level.
3. Sound mode
Select predefined sound modes to suit your video or music.
Press SOUND button to select a sound option from the display panel.
Select the STANDARD mode if you want to enjoy the original sound.
Select the MUSIC, MOVIE, VOICE, SPORTS mode depending on the content you want to listen to.
4. Night mode
For quiet listening, night mode decreases the volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital soundtracks.
Press NIGHT MODE button to turn night mode on or off.
Press and hold 5 seconds SOUND button to reset default audio setting.
Synchronize video and sound
If the audio and video are not synchronized, delay the audio to match the video.
Press AUDIO SYNC +/- button to synchronize the audio with the video.
7. RESPOND TO YOUR TV REMOTE CONTROL
Use your own TV remote control to control your soundbar
7a. For most Samsung, LG, Sony and Vizio TVs*
The soundbar responds to your TV remote control automatically. Controllable functions are volume
up/down and mute. Press and hold SHUFFLE button on soundbar remote control if you want to disable
this function.
To Next Page
Loading...
