Note:
– Make sure that the sound output of your TV is set to “External speaker”.
– Depending on the remote control, this function may not work well.
– This function does not operate on LG TV’s magic remote control.
– This function may not work well when HDMI CEC is ON.
– Some remote control may not operate if you press repeatedly the volume button.
– If your TV remote control is not supported, follow section 7b and do IR remote learning.
7b. For other TVs, do IR remote learning
To program the soundbar to respond to your TV remote controlfollow these steps. First, press and hold
VOLUME+ and SOURCE button to enter learning mode.
Then, press POWER button on the soundbar and press POWER button on the TV remote control
8. SYSTEM
1. Auto standby
This soundbar automatically switches to standby after 10 minutes of button inactivity and no
audio/video play from a connected device.
2. Auto wake up
The soundbar is powered on whenever a sound signal is received. This is most useful when
connecting to the TV using the optical cable, as most HDMI™ ARC connections enable this feature
by default.
3. Set display brightness
Press DIM button on remote control repeatedly to select a different brightness level of the display
To Next Page
Loading...
