panel on this product
4. Apply factory settings
• Reset this soundbar to the default settings programmed at the factory.
• In any source mode, press and hold VOLUME -, VOLUME+ and SOURCE button on soundbar top
panel until text display shows RESET.
• When the factory settings restore is complete, the product automatically switches off and
restarts.
5. Check Software version
• Press and hold DIM DISPLAY button for 5 seconds in any source, Hold and press DIM DISPLAY
button for 5 seconds, followed by SOUND MODE and NIGHT MODE button.
• To check subwoofer software version, pls connect subwoofer to soundbar via a 3.5mm AUX in
cable and follow the above procedure.
6. Software Update
JBL may offer updates for soundbar’s system firmware in the future. If an update is offered, you
can update the firmware by connecting a USB device with the firmware update stored on it to the
USB port on your soundbar.
Please visit www.JBL.com or contact JBL call center to receive more information about
downloading update files.
9. PRODUCT SPECIFICATIONS
General
Total Maximum Power: 450W
Soundbar Maximum Power: 150W
Soundbar Standby Power: <0.5W
Subwoofer Maximum Power: 300W
Subwoofer Standby Power: <0.5W
Soundbar Transducer Size: 6 x 2.25″ racetrack drivers \ 3×1.25″tweeter
Subwoofer Transducer Size: 10″
MaxSPL: 103db
Frequency Response: 35Hz to 20KHz
Operating temperature: 0°C – 45°C
Input and Output
• Audio inputs: 1 Analog, 1 Optical, Bluetooth, USB
• HDMI Video Inputs: 3
• HDMI Video Output(with Audio Return Channel): 1
• HDMI HDCP Version: 2.2
Bluetooth specification
• Bluetooth Version: 4.2
• Max Bluetooth Range: 32 ft (10m)
• Bluetooth Profile: A2DP V1.3 / AVRCP V1.6
USB specification
(USB) port: Type A
File Format Type Compatibility list:
To Next Page
Loading...
