* Switch between HDMI ARC/ HDMI 1/ HDMI 2/ HDMI 3/ Optical/ AUX/ Bluetooth/USB
** Switch between Standard/ music/voice/ movie/ sports sound mode or press and hold 5 seconds to
reset default audio setting
*** For USB playback only; switch between shuffle/ repeat all/ repeat one/ off
2. To use Bluetooth
2a. Press Bluetooth (BT) button on your remote control to start Bluetooth pairing
2b. Select “JBL Bar 3.1” to connect
Remark: Press and hold Bluetooth (BT) button on your remote
control for 3 seconds if you want to pair another mobile device.
NOTES
– If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
– In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 32.8 ft/ 10m.
– The Soundbar automatically turns off after 10 minutes in the Ready state.
– Electronic devices may cause radio interference. Devices that generate electromagnetic waves must
be kept away from the Soundbar main unit – e.g., microwaves, wireless LAN devices, etc.
3. To use Soundshift
By default, Soundshift is OFF, Bluetooth music cannot break in your current source.
Press SOUNDSHIFT button on your remote control to enable Soundshift feature.
While Soundshift is on, play and pause your music source to enjoy auto-switch
between your mobile devices – Bluetooth source (A) and TV – Previous source (B).
To Next Page
Loading...
