EasyManua.ls Logo

Harman JBL CINEMA SB190 - Subwoofer Pairing and Product Specs; Re-connecting the Subwoofer; JBL CINEMA SB190 Specifications

Harman JBL CINEMA SB190
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1616
10 RE-CONNECT THE SUBWOOFER
The soundbar and subwoofer are paired at factories. After power-
on, they are paired and connected automatically. In some special
cases, you may need to pair them again.
2 1
AC~
AC~
C~ AIR C~ AIR
To re-enter the subwoofer pairing mode
1. On the subwoofer, press and hold until the connection
status indicator turns fast ashing amber ( ).
2. On the soundbar, press to switch on.
The subwoofer is connected to the soundbar automatically.
Connected: The connection status indicator turns solid
amber ( ).
NOTES:
If the wireless connection fails again, check if there is a conflict or
strong interference (e.g. interference from an electronic device) around
the location. Remove these conflicts or strong interferences and
repeat the above procedures.
11 PRODUCT SPECIFICATIONS
General specication:
Power supply: 100 - 240V AC, ~50/60Hz
Total speaker power output (Max. @THD 1%): 380 W
Soundbar power output (Max. @THD 1%): 2 x 90 W
Subwoofer power output (Max. @THD 1%): 200 W
Soundbar transducer: 2x (48 x 90) mm racktrack driver +
2x 1.25" tweeter
Subwoofer transducer: 6.5", wireless sub
Standby consumption: < 0.5 W
Operating temperature: 0 °C - 45 °C
HDMI specication:
HDMI Video input: 1
HDMI Video output (With Enhanced Audio Return Channel,
eARC): 1
HDMI HDCP version: 2.3
Audio specication:
Frequency response: 40 Hz - 20 kHz
Max SPL: 96 dB
Audio inputs: 1 Optical, Bluetooth, USB (USB playback is
available in US version. For other versions, USB is for Service
only.)
USB specication:
USB port: Type A
USB rating: 5 V DC, 0.5 A
Supporting le format: mp3
MP3 Codec: MPEG 1 Layer 1/2/3, MPEG 2/2.5 Layer 1/2/3
MP3 sampling rate: 8 kHz - 48 kHz
MP3 bitrate:
MPEG 1 Layer 1: 32 kbps - 448 kbps;
MPEG 1 Layer 2: 32 kbps - 384 kbps;
MPEG 1 Layer 3: 32 kbps - 320 kbps;
MPEG 2/2.5 Layer 1: 32 kbps - 256 kbps;
MPEG 2/2.5 Layer 2/3: 8 kbps - 160 kbps
Wireless specication:
Bluetooth version: 5.1
Bluetooth prole: A2DP V1.3, AVRCP V1.5
Bluetooth frequency range: 2400 MHz - 2483.5 MHz
Bluetooth Max. transmitting power: < 0 dBm(EIRP)
Bluetooth modulation: GFSK, π/4 DQPSK
2.4G wireless frequency range: 2400 MHz - 2483 MHz
2.4G Max. transmitting power: 3 dBm
2.4G wireless modulation: GFSK

Other manuals for Harman JBL CINEMA SB190

Related product manuals