EasyManua.ls Logo

Harman JBL Endurance Peak 3 - TECH SPEC

Harman JBL Endurance Peak 3
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
led
behaviors
BT not connected
BT connecting
BT connected
Charging
fully charged
Low Battery
TECH
SPEC
Model: ENDURANCE PEAK3
Driver size: 10 mm/ 0.39" Dynamic Driver
Power supply: 5 V
1 A
Earbud: 12.5 g per pc (25 g combined)/
0.0275 lbs per pc (0.055 lbs combined)
Charging case: 76 g/ 0.167 lbs
Earbud battery type: Lithium-ion polymer (70 mAh/ 3.85 V)
Charging case battery type: Lithium-ion polymer (950 mAh/ 3.7 V)
Charging time: 2 hrs from empty
Talk time: 5.5 hrs
Music playtime with BT on: up to 10 hrs
Frequency response: 20 Hz - 20 kHz
Impedance: 16 ohm
Sensitivity: 102 dB SPL@1 kHz
Maximum SPL: 93 dB
Microphone sensitivity: -38 dBV/Pa@1 kHz
Bluetooth version: 5.2
Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter
frequency range:
2.400 GHz - 2.4835 GHz
Bluetooth transmitter
power:
< 14 dBm
Bluetooth transmitter
modulation:
GFSK, π/4 QPSK, 8DPSK
Maximum operation
temperature:
45 °C

Related product manuals