Note:
1.
Make sure all the location where need to be fixed by screws must be even.
2.
After reassembly, try to press one passive radiator and observe the another if it can stand up or take more than 10s to
recover flat. If yes, it should be OK if you have no special sealing equipments to test
3.
Before test the set, the glue should be held for 4 hours for drying.
2017-1-23 CONFIDENTIAL 10
Material PartNumberProcess Stepp
Step1/2 Fabric grille PleaserefertotheSBOM
StStepep3/6/73/6/7
SpeakSpeakeerr
Step12 Keyboardrubberbutt onpad
Step14 LEDboardrubberbuttonpad
EVEVAA
StStepep3/6/73/6/7
To Next Page
Loading...
